Agrinol Akvol-2E, Akvol-2 Print
Agrinol Akvol-2  TS U 23.2-30802090-054:2006
Agrinol Akvol-2E         TS U 23.2-30802090-051:2006
Agrinol Akvol-2 and Agrinol Akvol-2E are lubricating and cooling liquids used at the treatment of steel alloys, stainless, flameproof and high temperature steels and alloys.
The liquids are intended for the preparation of 3 – 10 % emulsions which are used at the treatment of steel alloys, stainless, flameproof and high-temperature steel and alloys during the operations of turning, drilling, milling, unfolding, thread cutting, stretching and polishing at heavy duties as well as for the treatment of aluminum alloys by cutting.
Index name Agrinol Akvol-2 Agrinol Akvol-2E
Kinematic viscosity at 50 °Ñ, mm² / s 40 – 80 40 – 100
Saponification number, mg ÊÎÍ / g, not more than 20 – 45 20 – 45
Acid number, mg ÊÎÍ / g, not more than 10 12
Fraction of total mass, %
water, not more than
sulfur
chlorine
5
1,5 – 2,8
4 – 5
5
1,5 – 2,8
–
Storage stability Withstands
Working emulsion 7 %
ðÍ index, ðÍ unity 8 – 10
Stability, %, not more than, Withstands
Corrosive influence on metals Withstands
 
Agrinol EKS-5, RG Print
Agrinol RG         TS U 23.2-30802090-020:2002
Agrinol RG is a working liquid used in the hydraulics of industrial equipment and generally intended for the usage as a (3 – 5) % aqueous emulsion in the hydraulics of shaft and mining equipment, including the underground one, at ambient temperature higher than 10 °Ñ.

Agrinol EKS-5  TS U 23.2-30802090-042:2005
Emulsifier Agrinol EKS-5 is a concentrated product which can be used as a 10 % aqueous emulsion in water with the hardness not more than 6 mg-equivalent / dm³ with 0,2 % soda ash added for greasing dies during the manufacture of concrete and ferrous-concrete products. The emulsifier facilitates the extraction of concrete and ferrous-concrete products from dies at the expense of decreasing adhesion (sticking) of products to metal.
Index name Agrinol RG Agrinol EKS-5
Kinematic viscosity at 50 °Ñ, mm² / s 100 50
Acid number, mg ÊÎÍ / g, not more than 16 8 – 12
Fraction of total mass, %
water, not more than
mechanical impurities
5
0,3
None
–
Storage stability Withstands –
Working emulsion 10 %
ðÍ index, ðÍ unity 8 – 10 –
Stability, %, not more than, 0,5 (4 h) Withstands (2 h)
Corrosive influence on metals Withstands –
 
technological lubricants Agrinol EHP, SP-3, HP Print
SP-3       All-Union State Standard 5702-75
SP-3 is a technological lubricant used as an aqueous emulsion while rolling non-ferrous metals and as a working liquid in the hydraulics of technological equipment.
Agrinol EHP    TS U 23.2-30802090-025-2004
Agrinol HP       TS U 23.2-30802090-022-2003
The technological lubricants Agrinol EHP and Agrinol HP are oil concentrated products which are intended for the usage as a (2 – 5) % emulsion in water with the hardness not higher than 5 mg-equivalent / dm³ on the stage of cold rolling of steel. They can also be used as a (5 – 10) % emulsion in water with the hardness not higher than 17 mg-equivalent / dm³ for the oiling of band steel before wrapping it into a roll with thermal treatment to follow.
Both products can be used at the treatment of ferrous metals by pressure or cutting.
Index name SP-3 Agrinol EHP Agrinol HP
Kinematic viscosity at 50 °Ñ, mm² / ñ – 50 35
Acid number, mg ÊÎÍ / g, not less than 7 –
Acid number, mg ÊÎÍ / ã, not more than 17 – 21 16 12
Corrosive influence on metals Withstands –
Fraction of total water mass, % None 1
Storage stability – Withstands
Working emulsion   3 %
ðÍ index, ðÍ unity – 8 – 9
Stability, %, not more than, within 6 hours – Withstands
Corrosive influence on metals – Withstands
 
Agrinol OM, EÒ-2U, KÀS-1S Print
Agrinol OM        TS U 23.2-30802090-048:2006
Emulsol Agrinol OM is used in metal machining and cold-rolled structural steel.
Emulsol used as a 5 % aqueous emulsion in cold sheet rolling of structural steels, including auto leaf.
In a 5.3 % aqueous emulsion can be used in the processing of carbon and alloy steels in grinding operations, turning, drilling, etc.
Agrinol ET-2U  TS U 23.2-30802090-005-2003
Emulsol Agrinol ET-2U is a concentrate of an oil-cooling fluid, the main focus of which is the cutting and abrasive machining of cast iron, carbon and alloy steels in the form of (3 – 10) % aqueous emulsions.
KAS-1C            TS U 24.6-36451680-091:2010
KAS-1C is designed for preparation (3 – 5) % aqueous emulsions used in the processing of ferrous metal cutting and grinding. For the preparation of emulsions can be used water up to 17 mg-ekv / dm3.
Index name Agrinol ÎÌ Àgrinol EÒ-2U KÀS-1S
Kinematic viscosity at 50 °Ñ, mm² / s 25 – 50 20 – 50 15
Saponification number, mg ÊÎÍ / g, not less than 22 – 45 – –
Acid number, mg ÊÎÍ / g, not more than – 15 – 23 –
Fraction of total water mass, % 3,0 3,0 –
Shelf stability Withstands
Working emulsion 5 % 10 % 3 %
ðÍ indices, ðÍ unit 7 – 9 8 – 10 8,5 – 9,6
Stability, %, not more than, 1,0 1,0 (4 hrs) Sel. (24hrs)
Corrosive influence on metals Withstands
 
RG-1s, RG-2s Print
RG-s       TS U 24.6-30802090-083:2009
Synthetic hydraulic fluid with RJ-s used in hydraulic systems of various industrial and mining equipment (hydraulic systems powered supports, conjugation of lining, etc.) in the form of (1,0 – 5) % aqueous emulsion at ambient temperatures above 10 °C.
RG-1s — to the moderates modes, RG-2s — for heavily loaded systems.
The emulsion is prepared in water hardness (up to 20 – 25 mg-ekv / dm3), including the mine water. Does not contain chlorine. Compatible with synthetic hydraulic fluids, operating in mining equipment and can be mixed with them in any proportion.
Index name RG-1s RG-2s
Kinematic viscosity at 50 °Ñ, mm² / s, not more than 15 20
Density at 20 °Ñ, kg / mm3, within 1000 – 1200 1100 – 1300
Concentrate shelf-stability Withstands
Working emulsion 1 % 0,75 %
ðÍ indices, ðÍ unit within 8,5 – 10,0
Corrosive influence on metals Withstands