CAITIM-202 All-Union State Standard 11110-75
Plastic frost-resisting lubricant is used for greasing frictionless bearings (bearing rotor gyroscopic devices and other high-speed instrument bearings) working at the temperature varying from minus 50 °С up to 120 °С.
CIATIM-203 All-Union State Standard 8773-73
Plastic anti-friction lubricant is used for greasing mechanism working at high unit loading.
The lubricant is intended for greasing toothed, worm gears of reducers, frictionless and slide bearings; various power drives, screw pairs, loaded reducers, mechanisms exploited on open grounds, car friction units.
| Index name |
CIATIM-202 |
CIATIМ-203 |
Meets classifications NLGI
DIN 51502 |
2
К2К-50 |
2
КР2Е-50 |
| Thickener |
Li |
| Operating temperature, min…max, °С |
– 50 … + 120 |
– 50 … + 90 |
| Dropping point, °С, not lower than |
175 |
160 |
| Penetration at 25 °С, мм·10 – 1, not more than |
265 – 325 |
250 – 300 |
| Proof strength at 50 °С, Pa, not less than |
150 |
250 |
| Colloid stability, %, not more than |
20 |
10 |
Efficient viscosity, Pa·sec
at 50 °С (at the average gradient of the strain rate of 1000 s–1, not less than)
at (–30 °С) (at the average gradient of the strain rate of 10 s–1, not more than) |
–
1300 |
1
1000 |
|
