VNII NP-207 All-Union State Standard 19774-74
Grease VNII NP-207 is used for rolling bearings in electric machines and the starter-generator with output speed up to 10000 min-1. Works at a residual pressure of 666.5 Pa.
Agrinol VNII NP-210 TS U 24.6-30802090-104:2008
Heat-resistant synthetic lubricant Agrinol VNII NP-210 is used for lubrication of heavily loaded slow moving bearings and bearings with oscillatory motion of the friction surfaces at small angles of swing.
Works at a residual pressure of 666.5 Pa.
Agrinol VNII NP-219 TS U 24.6-30802090-088:2008
Grease Agrinol VNII NP-219 is used to work in the ballscrews, bearings of electric motors and starter-generators with high loads and speed 9000 min-1.
| Index name |
VNII NP-207 |
Agrinol
VNII NP-210 |
Agrinol
VNII NP-219 |
Meets classifications NLGI
DIN 51502 |
3
КSi 3S-60 |
1
КSi F 1 U-20 |
0 / 1
КSi F 0 / 1 R-50 |
| Thickener |
к-Са |
– |
к-Са |
| Operating temperature, min…max, °С |
– 60 … + 200 |
– 20 … + 350 |
–50 … + 180 ( + 200) |
| Penetration at 25 °С, мм·10 – 1 |
Not norm. |
Not norm. |
300 – 380 |
| Proof strength, Pа, not less than |
68,6 (80 °С) |
Not norm. |
70 (80 °С) |
| Colloid stability at, %, not more than |
6,0 |
12 |
7,0 |
| Efficient viscosity at the average gradient of the strain rate of 10 s–1, not more than |
1400 (–30 °С) |
750(–10 °С) |
1400 (–30 °С) |
|
|
MOLYROLL GR TS U 24.6-36451680-148:2010
Lubricant MOLYROLL GR1 is intended for greasing rolling bearings of industrial equipment, operating at high loads (bearing roller supports traction chains, conveyors, transporters, bonderization cameras, painting, drying, and friction units of distributing chains cast iron).
Lubricant MOLYROLL GR2 is intended for greasing joints of the universal spindles Plate Rolling Mills in centralized lubrication systems.
| Index name |
MOLYROLL GR1 |
MOLYROLL GR2 |
Meets classifications NLGI
DIN 51502 |
2
КF2P-15 |
0
КF0P-15 |
| Thickener |
Silica |
| Operating temperature, min…max, °С |
– 15 … + 160 |
| Penetration at 25 °С, mm·10 – 1 |
265 – 295 |
340 – 400 |
| Proof strength at 50 °С, Pa, not less than |
40 |
30 |
| Colloid stability, %, not more than |
8,0 |
10,0 |
| Efficient viscosity at the average gradient of the strain rate of 10 s–1, Pа·s, not more than |
150 (25 °С) |
100 (25 °С) |
| Evaporation at 1500С within 1hour, %, not more than |
5,0 |
| Thermal stability at 150 °С within 1 hour |
Withstands |
Tribological characteristics on Four-ball machine at (20 ± 5) °С, N, not less than:
welding loading, N, not less than
critical loading, not less than
scuff index, N, not less than |
2764
1580
790 |
|
|
CIATIM-221 All-UNION STATE STANDARD 9433-80
Grease lubricant CIATIM-221 is designed for greasing friction units and electric machines, control systems and devices with output speed up to 10000 min-1 and associated surfaces in metal-metal and metal-rubber working in a vacuum at a residual pressure 666.5 Pa
Agrinol Grafitol TS U 23.2-30802090-093:2008
Agrinol Grafitol lubricant is intended for greasing high-friction and plain bearings, such as: bearings, hot fans, hinges and locks of the doors kilns and other industrial machinery. Contains graphite.
| Index name |
CIATIM-221 |
Agrinol Grafitol |
Meets classifications NLGI
DIN 51502 |
1 / 2
КSi 1 / 2 N-60 |
2
КF2R-25 |
| Thickener |
к-Са |
Silica gel |
| Operating temperature, min…max, °С |
– 60 … + 150 |
– 25 … + 180 |
| Dropping point, °С, not lower than |
200 |
250 |
| Penetration at 25 °С, mm·10 – 1 |
280 – 360 |
265 – 295 |
| Proof strength, Pa, not less than |
120 (50 °С) |
30 (20 °С) |
| Colloid stability at, %, not more than |
– |
8 |
| Efficient viscosity at the average gradient of the strain rate of 10 s–1, Pа·s, not more than |
800 (-50 °С) |
300 (0 °С) |
|
|
Aerol-A TS U 23.2-30802090-007-2004
Aerol-A is a lubricant intended for greasing frictionless bearings of industrial equipment functioning at elevated loading (bearings of drag-chain roller supports, conveyors, bonderization chambers, painting, drying, friction units of distribution chains of cast-iron founding equipment).
Aerol-1A is intended for greasing joints of universal spindles of plate mills in the systems of centralized lubricant.
| Index name |
Aerol-А |
Aerol-1А |
Meets classifications NLGI
DIN 51502 |
2
КF2P-15 |
0
КF0P-15 |
| Thickener |
Silica |
| Operating temperature, min…max, °С |
– 15 … + 160 |
| Dropping point, °С, not lower than |
250 |
– |
| Penetration at 25 °С, mm·10 – 1 |
265 – 295 |
340 – 400 |
| Proof strength at 50 °С, Pa, not less than |
30 |
3 |
| Colloid stability, %, not less than |
8,0 |
10,0 |
| Efficient viscosity at the average gradient of the strain rate of 10 s–1, Pа•s, not more than |
150 (25 °С) |
100 (25 °С) |
Tribological characteristics on Four-ball machine at (20 ± 5) °С, N, not less than,
welding loading, N, not less than
critical loading, not less than
scuff index, N, not less than |
2510
1580
790 |
|
|
|
