PROTECTING TG TS U 23.2-30802090-110:2009
Lubricant PROTECTING TG is intended for protection against wear and corrosion of steel ropes (including ropes in underground and surface mining equipment), both in their process of manufacture, and during transportation and operation, as well as for conservation of metal products in storage and storage in open areas.
| Index name |
PROTECTING TG |
| Thickener |
Solid Hydrocarbones |
| Operating temperature, min…max, °С |
– 35 … + 50 |
| Kinematic viscosity at 100 °С, мм² / с, not less than |
16,0 |
Temperature, °С:
flash point in an open crucible, not lower than
drop falling |
150
62 – 72 |
| Low-temperature properties at –35 °С |
Withstands |
| Setting-up time, sec, not more than |
6 |
Thermal stability
Preservation of the structure homogeneity |
Withstands |
| The adhesion ability (reset on a centrifuge in the separation factor Kp = 6270), %, not more |
50 |
| Protective ability of steel 10 in the electrolyte solution, within 5 days |
5 |
|
|
Agrinol Torsiol-35 TS U 23.2-30802090-053:2006
Agrinol Torsiol-35B / 1 lubricant is used as a greasing material for producing steel ropes.
Agrinol Torsiol-35B / 2 is a lubricant used for preserving and protecting steel ropes against atmospheric influence.
Agrinol Torsiol-35E is a lubricantused for greasing steel ropes, including the ropes in mining ground and underground hoisting plants, in the process of exploitation. It can be used for greasing the process of steel wire ropes manufacturing, designed to operate at very low temperatures of minus 35 °C to 50 °C.
| Index name |
Agrinol Torsiol-35B / 1 |
Agrinol Torsiol-35B / 2 |
Agrinol Torsiol-35E |
| Thickener |
Solid hydrocarbons |
| Operating temperature, min…max, °С |
– 35 … + 50 |
| Kinematic viscosity at 100 °С,mm² / s, not less than |
8,5 |
– |
10 – 20 (50 °С) |
Tempereture, °С:
Flash point in an open crucible, not lower than
Drop falling |
180
65 – 80 |
180
70 – 80 |
|
| Low-temperature properties at –35 °С |
Withstands |
Thermal stability
Preservation of the structure homogeneity
evaporation, %, not more than |
Withstands
0,2 |
Withstands
0,7 |
–
– |
| The adhesion ability |
60 |
30 |
|
| Protective ability of steel 10 in the electrolyte solution, within 5 days |
– |
5 |
| |
|
|
