ТУ У 23.2-30802090-107:2008Agrinolv MGP-10 and Agrinol MGP-12 are fluids intended for shock absorbers that are used as working liquids in telescopic racks and hydraulic shock absorbers of lorries and cars.The environment temperature limits for the optimum engine performance by Agrinol ICR-10 rise from minus 50 ° C up to 100 ° C, and for liquid Agrinol ICR-12 from 40 ° C up to 100 ° C.Guarantee period of storage – 2 years from the day of manufacture. Table 24
| Index name |
Agrinol
MGP-10 |
Agrinol
MGP-12 |
| Kinematic viscosity, mm²/s: |
|
|
| - at 100°С, not less than |
– |
3,8 |
| - at 50°С, not less than |
10,0 |
12,0 |
| - at minus 20°С, not less than |
1000,0 |
800,0 |
| Viscosity index, not less then |
– |
85 |
| Acid number, mg KON/g , not more than |
0,15 |
– |
| Temperature, °С: |
|
|
| - flash temperature in an open crucible, not lower than |
145 |
140 |
| - solidification temperature, not higher than |
−50 |
−40 |
| Fraction of total mass, %, not more than:: |
|
| - mechanical impurities |
None |
| - water |
None |
| Zink fraction of total mass, %, not more than |
– |
0,03 |
| Colour, units of CNT, not more than |
– |
6,0 |
| Corrosive influence on metals |
Withstands |
| Inclination for foaming, сm³, not more than |
|
|
| - Sequence I |
– |
50 |
| - Sequence II |
– |
50 |
| - Sequence III |
– |
50 |
| Foams stability, cm ³, not more than: |
|
|
| - Sequence I |
– |
5 |
| - Sequence II |
– |
5 |
| - Sequence III |
– |
5 |
| Tribological characteristics on ChShM at (20±5)°С |
|
|
| - deterioration index, mm, at loading of 196 N |
– |
0,55 |
| Ash%, not more than |
– |
0,5 |
| Density at 20°С, kg/m³ |
– |
917 |
|
