Agrinol Tp
TS U 23.2-30802090-015-2003
Agrinol Tp Oils are intended for lubricating and cooling bearings of such various turbo-units as steam and gas turbines, water turbines, turbocompressor machines, ship steam turbine units and other analogous types of equipment. These oils are also used as working liquids for turbo-units’ regulating systems, circulating and hydraulic systems of diverse industrial mechanisms.
The oils are used at the temperature from 40 °С up to 80 °С. They may have direct contact with hot water or overheated water steam.
Agrinol Tp–22 Oil is intended fo high-speed steam turbines, centrifugal and turbocompressors if oil viscosity provides the required anti-deterioration properties.
Agrinol Tp–30 Oil is intended for water turbines, turbo- and centrifugal compressors.
Agrinol Tp–46 Oil is intended for ship steam-power units with heavily loaded reducers as well as for auxiliary mechanisms.
| Index name |
Agrinol TP-22с |
Agrinol Tp-22 |
Agrinol Tp-30 |
Agrinol Tp-46 |
| Meets classifications ISO VG |
32 |
32 |
46 |
68 |
Kinematic viscosity, mm² / s:
at 40 °С
at 50 °С |
28,8 – 35,2
20,0 – 23,0 |
28,8 – 35,2
– |
41,1 – 50,6
– |
61,2 – 74,8
– |
| Viscosity index, not less than |
90 |
90 |
95 |
95 |
| Acid number, mg КОН / g, not more than |
0,05 |
0,05 |
0,3 |
0,3 |
Тemperature, °С:
flash point in an open crucible, not less
pour point not higher than |
186
– 15 |
185
– 15 |
90
– 10 |
220
– 10 |
Stability against oxidation:
sediment, %, not more than
Alkaline number, mg КОН / g, not more than |
None
0,1 |
0,005
0,1 |
0,01
0,5 |
0,008
0,7 |
| Corrosive aggression (cooper, steel, points, not more than) |
None (–) |
None (1в) |
| Resistance-to-emulsion number, s, not more than |
180 |
210 |
180 |
Turbine Oils with Additives TP ALL-UNION STATE STANDARD 9972-74
Turbine Oils with Additives Тp-22, Тp-30 and Тp-46 are used for greasing of bearings and auxiliary mechanisms of turbo-units including steam gas turbines, turbocompressor machines, water turbines, ship’s steam turbine units and other analogous types of equipment. These oils are also used as hydraulic liquids for working with regulating systems of the mentioned machines.
Oils for marine Gas turbines ALL-UNION STATE STANDARD 10289-79
The oil is used for greasing and cooling gearboxes and bearings of marine gas turbines.
| Index name |
For marine and gas turbines |
Tp-22 |
Tp-30 |
Tp-46 |
| Meets classifications ISO VG |
– |
32 |
46 |
68 |
| Kinematic viscosity at 40 °С, m² / s |
7,0 – 9,6 (50 °С) |
28,8 – 35,2 |
41,4 – 50,6 |
61,2 – 74,8 |
| Viscosity index, not less than |
40 |
90 |
95 |
90 |
| Acid number, mg КОН / g, not more than |
0,02 |
0,05 |
0,5 |
0,5 |
Temperature, °С:
Flash point in an open crucible, not lower than
fluidity, not higher than
pour point, not higher than |
135 (in close tigle)
–
– 45 |
186
– 6
– 15 |
190
– 6
– 10 |
220
– 6
– 10 |
| Ash level of base oil, % not more than |
0,005 |
0,005 |
| Corrosive aggression to cooper (steel, group) points |
– |
None (1) |
| Resistance-to-emulsion number, min, not more than |
– |
3,0 |
3,5 |
3,0 |
Stability against oxidation, not more than:
sediment, %, not more than
acid number, mg КОН / g, not more than |
0,20
0,65 |
0,005
0,1 |
0,01
0,5 |
0,008
0,7 |
TURBINE OILS according to All-Union State Standard 32-74 ALL-UNION STATE STANDARD 32-74
Turbine oils Т22, Т30, are used for greasing of bearings and auxiliary machinery turbines (steam and gas turbines, turbo machinery, turbines), as well as to work in control systems of these machines as a hydraulic liquids.
Turbine oils Т46 и Т57 are used in the ship steam-turbine plants (geared-turbine sets) and other auxiliary ship mechanisms with hydraulic.
| Index name |
Т22 |
Т30 |
Т46 |
Т57 |
| Meets classifications ISO VG |
32 |
46 |
68 |
100 |
| Kinematic viscosity at 50 °С, sSt |
20 – 23 |
28 – 32 |
44 – 48 |
55 – 59 |
| Viscosity index, not less than |
70 |
65 |
60 |
70 |
| Acid number, mg КОН / g, not more than |
0,02 |
0,02 |
0,02 |
0,05 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
180
– 15 |
180
– 10 |
195
– 10 |
195
– |
Fraction of total mass, %, not more than:
mechanical impurities
water-soluble acids and alkalis |
None
None |
| Ash, %, not more than |
0,005 |
0,005 |
0,010 |
0,030 |
| Resistance-to-emulsion number, min, not more than |
5 |
5 |
5 |
5 |
| Corrosion teat on cooper plates, within 3 hours., 100 °С |
Withstands |
Stability against oxidation:
sediment, %, not more than
acid number, mg КОН / g, not more than |
0,10
0,35 |
0,10
0,35 |
0,10
0,35 |
–
– |
|
