TU U23.2-30802090-085:2009Agrinol Motor Oils are intended for use in closed systems, gasoline and diesel engines of cars, trucks and off-road equipments.Universal motor oil "Agrinol 15W-40 SF / CC", "Agrinol 20W-40 SF / CC" should be preferably used for all gasoline engines output from 1981 to 1988, running on leaded fuel.They are provided with extra antiwear and anti-corrosion properties, having fewer tendencies to form deposits and slags.They are used to replace the oil of category SC, SD и SE, as well as highly accelerated oil for diesel engines, including those with moderate supercharged heavy duty production since 1961.Agrinol 20W-50 SF / CC -it is universal, multigrade motor oil.This type of oil is preferable for all petrol and diesel engines of passenger cars of domestic and foreign manufacture, including turbo-charged, working in heavy conditions. The oil has been especially adapted for all engines with a high degree of deterioration and equipment operating in the southern areas.The environment temperature limits for the optimum engine performance by grade of oils are as stated below:- For oil 5W-40 from minus 32°С to 40°С;- For oil 10W-40 from minus 28°С to 40°С;- For oil 15W-40 from minus 25°С to40°С;- For oil 20W-40 from minus 20°С to 45°С;- For oil 20W-50 from minus 20°С to 50°С. The standards of quality for oil 5W-40 and 10W-40 are shown in Table 6, for oil 15W-40 - in tables 7 and 8, and for oil 20W-40 and 20W-50.Guarantee period of storage – 5 years from the day of manufacture.
| Index Name |
Agrinol
5W-40
CG-4/SJ |
Аgrinol
5W-40
SL/CF |
Agrinol
10W-40
CG-4/SJ |
Agrinol
10W-40
CF-4/SH |
| Kinematic viscosity at 100°С, mm²/s |
11,7-16,3 |
12,5-16,3 |
| Viscosity index, not less than |
140 |
130 |
| Alkaline number, mg КОN/g, not less than |
8,5 |
8,5 |
8,5 |
7,5 |
| Temperature, °С: |
|
| - flash temperature in an open crucible, not lower than |
200 |
| - solidification temperature, not higher than |
Minus 32 |
| Colour, units of CNT with attenuation 15:85, not more than |
3 |
| Sulfated Ash,%, not more |
1,5 |
1,5 |
1,5 |
1,4 |
| Fraction of total mass, %, not more than: |
|
| - mechanical impurities |
0,015 |
| - water |
Traces |
| Stability according to IPO during: |
|
|
| - 50 hours |
Withstands |
|
| - 40 hours |
|
Withstands |
| Corrodibility on lead plates, g/m², not more than |
10 |
| Washing properties according to PZV, points, not more than |
0,5 |
| Active elements’, fraction of total mass, %, not less than:- zinc- phosphorous |
0,250,10 |
0,250,10 |
0,250,11 |
0,230,10 |
| Density at 20°С, kg/m³, not more than |
900 |
905 |
| Dynamic viscosity, mPa • s * |
– |
Note: * The index is not specified, is determined by necessity
| Index name |
Agrinol
15W-40
CH-4/SJ |
Аgrinol
15W-40
CG-4/SL |
Аgrinol
15W-40
CG-4/SJ |
Аgrinol
15W-40
CF-4/SG |
| Kinematic viscosity at 100°С, mm²/s |
12,5-16,3 |
| Viscosity index, not less than |
120 |
| Alkaline number, mg КОN/g, not less than |
9 |
9 |
8,5 |
8,2 |
| Temperature, °С: |
|
| - flash temperature in an open crucible, not lower than |
205 |
| - solidification temperature, not higher than |
Minus 30 |
| Colour, units of CNT, not more than |
4 |
| Sulfated Ash,%, not more than |
1,5 |
| Ash level,% not more than |
|
| - mechanical impurities |
0,015 |
| - water |
Traces |
| Stability according to IPO during: |
|
| - 30 hours |
Withstands |
| Corrodibility on lead plates, g/m², not more than |
10 |
| Washing properties according to PZV, points, not more than |
0,5 |
| Active elements’ fraction of total mass, %, not less than: - calcium - zinc |
0,250,10 |
0,250,10 |
0,250,10 |
0,250,10 |
| Density at 20°С, kg/m³, not more than |
910 |
| Dynamic viscosity, mPa • s |
– | Note: * The index is not specified, is determined by necessity
| Index name |
Agrinol
15W-40
SF/CC |
Agrinol
15W-40
SG/CD |
Аgrinol
15W-40
CI-4 |
| Kinematic viscosity at 100°С, mm²/s |
12,5-16,3 |
| Viscosity index, not less than |
115 |
120 |
120 |
| Alkaline number, mg КОN/g, not less than |
6 |
7,5 |
7,5 |
| Temperature, °С: |
|
|
|
| - flash temperature in an open crucible, not lower than |
205 |
210 |
205 |
| - solidification temperature, not higher than |
Minus 25 |
Minus 28 |
Minus 28 |
| Colour, units of CNT, not more than |
4 |
| Sulfated Ash, %, not more than |
1,4 |
1,5 |
1,5 |
| Fraction of total mass, %, not more than |
|
| - mechanical impurities |
0,015 |
| - water |
Traces |
| Stability according to IPO during: |
|
| - 30 hours |
Withstands |
| Corrodibility on lead plates, g/m², not more than |
10 |
| Washing properties according to PZV, points, not more than |
0,5 |
| Active elements’ fraction of total mass, %, not less than |
|
|
|
| - calcium |
0,20 |
0,20 |
0,25 |
| - zink |
0,10 |
0,10 |
0,10 |
| Density at 20°С, kg/m³, not more than |
910 |
| Dynamic viscosity, mPa • s |
– | Note: * The index is not specified, is determined by necessity Table 9
| Index name |
Agrinol
20W-40
SF/CC |
Agrinol
20W-50
SF/CC |
| Kinematic viscosity at 100°С, mm²/s |
12,5-16,3 |
16,3-21,9 |
| Viscosity index, not less than |
115 |
| Alkaline number, mg КОN/g, not less than |
6,0 |
| Temperature, °С: |
|
|
| - flash temperature in an open crucible, not lower than |
210 |
215 |
| - solidification temperature, not higher than |
Minus 28 |
Minus 28 |
| Colour, units of CNT, not more than |
4 |
| Sulfated Ash, %, not more than |
1,3 |
| Fraction of total mass, %, not more than |
|
| - mechanical impurities |
0,015 |
| - water |
Traces |
| Stability according to IPO during: |
|
| - 30 hours |
Withstands |
| Corrodibility on lead plates, g/m², not more than |
10 |
| Washing properties according to PZV, points, not more than |
0,5 |
| Active elements’, fraction of total mass, %, not less than: |
|
| - calcium |
0,20 |
| - zink |
0,08 |
| Density at 20°С, kg/m³, not more than |
910 |
| Dynamic viscosity, mPa • s* |
– | Note: * The index is not specified, is determined by necessity
|
