AGRINOL MP OIL FOR ROLLING MILLS TS U 23.2-30802090-050:2006
The oil is designed for flushing lubrication systems of automobile engines without disassembling them, while changing engine oil.
Flushing liquid Agrinol MPT-2m TS U 23.2-30802090-080:2008
Flushing liquid Agrinol MPT-2M is used for flushing lubrication systems of diesel engines (diesel, marine, automotive, road and construction equipment, etc.), as well as for gasoline engine cars and trucks without their disassembly (while replacing fluid).
| Index name |
Agrinol MP |
Agrinol MPT-2m |
| Kinematic viscosity at 50 °С, mm² / s |
9 – 12 |
18 – 22 |
Temperature, °С:
Flash point in an open crucible, not lower than
Pour point, not higher than |
140
– 40 |
160
– 15 |
Fraction of total mass, %, not more than:
Mechanical impurities
water
sulfated ash |
0,01
Traces
1,2 |
0,015
Traces
0,5 |
Fraction of total mass of active elements, %, not less than:
calcium
zink |
0,2
0,1 |
–
– |
Tribological characteristics on Four-ball machine at (20 ± 5) °С:
deterioration index (196 Н), mm, not more than
welding loading
scuff index |
0,4
–
– |
–
2067
398 |
Oil divider – Form Divider TS U 24.6-30802090-106:2008
Form Divider oils are used as a divider in continuous casting machines for rolled metal, as well as the manufacture of multi-faceted profiles by continuous casting.
| Index name |
Form Divider |
Kinematic viscosity, mm² / s:
at 40 °С
at 100 °С, not less than |
45 – 65
7,5 |
| Acid number, mg КОН / g, not more than |
0,5 |
Temperature, °С:
flash point in an open crucibleв, not lower than
pour point, not higher than |
230
– 12 |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulphur |
0,015
Traces
1,0 |
| Colour, units of CNT, not more than |
5 |
| Coking ability, %, not more than |
0,15 |
| Saponification number, mg КОН / g, not more than |
50 – 65 |
| Density at 20 °С, kg / m³, not more than |
900 |
Instrumental Oil MVP All-Union State Standard 1805-76
Mineral instrumental oil MVP of sulfuric purification is intended for lubricating of test instruments at temperatures from minus 60 °C to 110 °C, for filling the oil-pneumatic shock absorbers and in the process of lubricants manufacture.
| Index name |
MVP |
| Kinematic viscosity at 50 °С, mm² / s |
6,5 – 8,0 |
| Acid number, mg КОН / g, not more than |
0,03 |
Temperature, °С:
flash point in an open crucible, not lower t han
pour point, not higher than |
125
– 60 |
Fraction of total mass, %, not more than:
mechanical impurities
water
water-soluble acids and alkalis |
None
None
None |
| Ash, %, not more than |
0,005 |
| Colour, units of CNT, not more than |
1,5 |
| Density at 20 °С, kg / m³, not more than |
900 |
Air filter oil (Viscin oil) All-Unions State Standard 7611-75
Air filter oil (viscin oil) is used to absorb the dust from the air.
| Index name |
Viscin oil |
| Kinematic viscosity at 50 °С, mm² / s |
19 – 24 |
| The ratio of kinematic viscosity at 20 °C to kinematic viscosity at 50 °C, not more than |
4,5 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
165
– 20 |
Fraction of total mass, %, not more than:
water
water-soluble acids and alkalis |
Traces
None |
| Ash, %, not more than |
0,015 |
| Coking ability, % |
0,3 – 0,8 |
|
