Agrinol MS-20 TS U 23.2-30802090-013-2003
Agrinol МS-20 Oil does not contain active additives. It is intended for the usage for industrial equipment of rolling mills, reducers and other equipment of metallurgical, mining, woodworking enterprises. For terrestrial applications.
Agrinol МS-20p and Agrinol МS-20ps oils are generally used as lubricating oils in those cases when high requirements to exploitation properties, especially for anti-deterioration and washing properties of oils are necessary.
Agrinol MS-20gk is intended for use as grease in the lubricating system of gas motor compressors 10GKNA, MK8 and / or in other similar units. Oil consumers are enterprises of metallurgy, mining, mining and timber industries, paper manufacturing companies and gas transportation system companies.
| Index name |
Agrinol
MS-20 |
Agrinol
MS-20p |
Agrinol
MS-20ps |
Agrinol
МS-20gk |
| Kinematic viscosity at 100 °С, mm² / s, not less than |
20,5 |
20 |
20 |
20,5 |
| Viscosity index, not less than |
85 |
85 |
85 |
85 |
| Acid number, mg КОН / g, not more than |
0,03 |
0,04 |
0,05 |
0,1 |
| Alkaline number, mg КОН / g |
– |
Not less than 0,9 |
Not less than 1,5 |
Not more than 0,9 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
240
– 13 |
230
– 15 |
230
– 15 |
250
– 15 |
| Coking ability of base oils, %, not more than |
0,3 |
0,3 |
0,5 |
0,3 |
| Sulfate ash level, %,not more than |
0,005 |
0,25 |
0,25 |
– |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulfur in the base oil
calcium |
None
Traces
0,7
– |
0,01
None
0,7
0,08 |
0,015
None
1,0
0,1 |
None
None
0,5
– |
Agrinol MS-14 TS U 23.2-30802090-038:2005
Agrinol МS-14 are lubricating oils for industrial equipment. It is used as a greasing of liquid for industrial equipment of metallurgical, mining, concentrating and mechanical engineering enterprises.
| Index name |
Agrinol МСs-14 |
Agrinol MS-14p |
| Kinematic viscosity at 100 °С, mm² / s, not less than |
14,0 |
14,0 |
| Viscosity index, not less than |
85 |
85 |
| Acid number, mg КОН / g, not more than |
0,25 |
0,25 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
215
– 30 |
215
– 25 |
| Sulfate ash, %, not more than |
0,003 |
0,25 |
Fraction of total mass, %, not more than:
mechanical impurities
water
zink, %, not less than |
None
None
– |
None
None
0,15 |
| Colour, units of CNT, not more than |
8 |
9 |
| Corrosive influence on metals |
Withstands |
Stability against oxidation:
acid number after oxidation, mg КОН / g, not more than
sediment after oxidation, %, not more than |
0,5
0,2 |
0,5
0,2 |
| Coking ability, %, not more than |
0,40 |
0,40 |
Tribological characteristics on Four-ball machine at (20 ± 5) °С
deterioration index (196Н), mm, not more than |
0,70 |
0,60 |
Petroleum industrial oils TS U 23.2-30802090-061:2006
Industrial oils I-20, I-30, I-40, I-50 are used as hydraulic liquids for greasing of various friction units of industrial equipment. They are also used for producing of lubricating materials.
| Index name |
I-20 |
I-30 |
I-40 |
I-50 |
| Kinematic viscosity at 40 °С, mm² / s |
25 – 37 |
38 – 54 |
55 – 80 |
80 – 120 |
| Acid number, mg КОН / g, not more than |
0,08 |
Тemperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
175
– 11 |
180
– 11 |
180
– 11 |
210
– 11 |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulfur |
None
Traces
1,0 |
| Corrosion test |
Withstands |
| Coking ability, %, not more than |
0,05 |
0,07 |
0,1 |
0,2 |
Stability against oxidation:
acid number, mg КОН / g, not more than
changing of viscosity, % |
2
± 10 |
| Colour, units of CNT, not more than |
6 |
6 |
7 |
7 |
Petroleum industrial oils All- Union State Standard 20799 – 88
Industrial oils I-5А, I-8А, I-12А, I-12А1 are refined distillate and residual oils or mixtures of them without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. They can also be used as hydraulic liquids.
| Index name |
I-5А |
I-8А |
I-12А |
I-12А1 |
| Kinematic viscosity at 40 °С, mm² / s |
6 – 8 |
9 – 11 |
13 – 17 |
13 – 17 |
| Acid number, mg КОН / g, not more than |
0,02 |
0,02 |
0,02 |
0,02 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
140
– 18 |
150
– 15 |
170
– 15 |
165
– 30 |
Fraction of total mass, %, not more than:
mechanical impurities
water
solvents in the oils of selective refinement |
None
Traces
None |
| Sulfur fraction of total mass, %, not more than |
1,0 |
1,0 |
1,0 |
1,0 |
| Ash, %, not more than |
0,005 |
Stability against oxidation:
increase of acid number, mg KOH / g, not more than
increase of resins, %, not more than |
0,20
1,5 |
0,20
1,5 |
0,20
1,5 |
0,20
1,5 |
| Colour, units of CNT, not more than |
1,0 |
1,5 |
1,5 |
2,5 |
Petroleum industrial oils All-Union State Standard 20799 – 88
Industrial oils I-20А, I-30А, I-40А, I-50А are refined distillate and residual oils or mixtures of them without any additives. These oils are used for machines and mechanisms of industrial equipment that does not impose specific requirements to anti-oxidation and anti-corrosion properties of oils. They can also be used as hydraulic liquids
| Index name |
I-20А |
I-30А |
I-40А |
I-50А |
| Kinematic viscosity at 40 °С, mm² / s |
29 – 35 |
41 – 51 |
61 – 75 |
90 – 110 |
| Acid number, mg КОН / g, not more than |
0,03 |
0,05 |
0,05 |
0,05 |
Temperature, °С:
Flash point in an open crucible, not lower than
Pour point, not higher than |
200
– 15 |
210
– 15 |
220
– 15 |
225
– 15 |
Fraction of total mass, %, not more than:
Mechanical impurities
water
solvents in the oils of selective refinement |
None
Traces
None |
| Sulfur fraction of total mass, %, not more than |
1,0 |
1,0 |
1,1 |
1,1 |
| Ash, %, not more than |
0,005 |
Stability against oxidation:
increase of acid number, mg KOH / g, not more than
increase of resins, %, not more than |
0,30
2,0 |
0,40
3,0 |
0,40
3,0 |
0,40
3,0 |
| Colour, units of CNT, not more than |
2,0 |
2,5 |
3,0 |
4,5 |
|
