Agrinol I-HG-B TS U 30802090.003-2000
The oils are used as working liquids in hydraulic systems of machine equipment, automatic lines, presses, constructing, agricultural and road machines. The oils are also used for greasing of reducers of small and average loading, plain slideway and slideway bearing of engineering tools etc.
| Index name |
Agrinol I-HG-B-32 |
Agrinol I-HG-B-46 |
Agrinol I-HG-B-68 |
Agrinol I-HG-B-100 |
Agrinol I-HG-B-220 |
Meets classification ISO VG
ISO 6743 (DIN 51524.2) |
32
HM (HLP) |
46
HM (HLP) |
68
HM (HLP) |
100
HM (HLP) |
220
HM (HLP) |
| Kinematic viscosity at 40 °С, mm² / s |
29 – 35 |
41 – 51 |
61 – 75 |
90 – 110 |
198 – 288 |
| Acid number, mg КОН / g, not more than |
1,0 |
1,0 |
1,0 |
1,0 |
1,0 |
Temperature, °С:
Flash points in an open crucible, not lower than
Pour point, not higher than |
200
– 15 |
210
– 15 |
220
– 15 |
225
– 15 |
225
– 10 |
Fraction of total mass, %, not more than:
Mechanical impurities
water |
None
Traces |
Stability against oxidation
acid number after oxidation, mg, KOH / g, not more than |
0,3 |
0,4 |
0,4 |
0,4 |
0,5 |
| Corrosive influence on metals |
withstands |
AGRINOL IGP TS U 23.2-30802090-065:2006
Agrinol oil IGP-18, -30, -38, -49 are used to lubricate high-speed gearboxes, small and moderate gears and worm gears, variable, electromagnetic, and gear couplings, bearing units, sliding guides and bearings, and other sites where required oils are oils with improved antioxidant and antiwear properties.
| Index name |
Agrinol
IGP-18 |
Agrinol
IGP-30 |
Agrinol
IGP-38 |
Agrinol
IGP-49 |
Meets classifications ISO VG
ISO 6743 (DIN 51524.2) |
32
HM (HLP) |
46
HM (HLP) |
68
HM (HLP) |
68
HM (HLP) |
| Kinematic viscosity at 40 °С, mm² / s |
24 – 30 |
39 – 50 |
55 – 65 |
76 – 85 |
| Viscosity index, not less than |
90 |
| Acid number, mg КОН / g, not more than |
1,0 |
Temperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
180
– 15 |
200
– 15 |
210
– 15 |
215
– 15 |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulfur
zink |
None
Traces
1,0
0,04 |
| Ash, %, not more than |
0,2 |
Stability against oxidation:
acid number, mg КОН / g, not more than |
2,0 |
| Sapunification number, mg КОН / g |
0,8 – 2,5 |
Agrinol IGP TS U 23.2-30802090-065:2006
Agrinol IGP-72, -91, -114, -152 and -182 are used in the hydraulics of heavy press equipment. They are also used for greasing of gear-boxes, toothed and worm reducers of average loading, circulating greasing of systems of various equipment.
| Index name |
Agrinol
IGP-72 |
Agrinol
IGP-91 |
Agrinol
IGP-114 |
Agrinol
IGP-152 |
Agrinol
IGP-182 |
Meets classifications ISO VG
ISO 6743 (DIN 51524.2) |
100
HM (HLP) |
150
HM (HLP) |
150
HM (HLP) |
220
HM (HLP) |
320
HM (HLP) |
| Kinematic viscosity at 40 °С, mm² / s |
110 – 125 |
148 – 165 |
186 – 205 |
265 – 280 |
320 – 348 |
| Viscosity index, not less than |
90 |
| Acid number, mg КОН / g, not more than |
1,0 |
Temperature, °С:
Flash points in an open crucible, not lower than
Pour point, not higher than |
220
– 15 |
225
– 15 |
230
– 15 |
230
– 15 |
240
– 15 |
Fraction of total mass, %, not more than:
Mechanical impurities
water
sulphur
zink |
None
Traces
0,04
1,0 |
None
Traces
0,04
1,4 |
None
Traces
0,04
1,5 |
| Ash, %, not more than |
0,2 |
Stability against oxidation:
acid number, mg КОН / g, not more than |
2,0 |
| Saponification number, mg КОН / g |
0,8 – 2,5 |
Agrinol IGP- 4 TS U 23.2-30802090-089:2008
Industrial Oil IGP-4 is used for lubricating high-speed gearboxes, little and half loaded gears and worm gears, variator, electromagnetic, and gear couplings, bearing boxes of slide bearings and other components that require oils with enhanced antioxidant and antiwear properties.
| Index name |
Agrinol IGP-4 |
Meets classifications ISO VG
ISO 6743 (DIN 51524.2)
All-Union State Standard 17479.4 |
5
HM (HLP)
I-L-S-5 |
| Kinematic viscosity at 40 °С, mm² / s |
4,0 – 6,5 |
| Acid number, mg КОН / g, not more than |
1,0 |
Тemperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
100
– 15 |
| Colour, units of CNT, not more than |
1,5 |
| Ash, %, not more than |
0,2 |
| Corrosive influence on metals |
None |
Fraction of total mass, %, not more than:
mechanical impurities
water
sulfur
zink |
None
Traces
0,9
0,04 |
VNII NP-403 All-Union State Standard 16728-78
Industrial oil VNII-NP-403 is used as a working liquid for volumetric hydraulics of metal-cutting machines, automatical lines, individual heavy presses and other industrial equipment as well as for circulating greasing of systems of metal-cutting machines and other mechanisms.
| Index name |
VNII NP-403 |
Meets classification ISO VG, ISO 6743 (DIN 51524.2)
All-Union State Standard 17479.4 – 87 |
46, HM (HLP)
I-G-V-46(p) |
| Kinematic viscosity at 40 °С, mm² / s |
41 – 51 |
| Viscosity index, not less than |
97 |
| Acid number, mg КОН / g, not more than |
0,7 – 1,0 |
Тemperature, °С:
flash point in an open crucible, not lower than
pour point, not higher than |
202
– 20 |
Stability against oxidation, not more than:
sediment, %
acid number, mg КОН / g, |
None
1,30 |
Fraction of total mass, %, not more than:
sulphur
mechanical impurities
water |
1,0
0,007
Traces |
|
