Hydraulic Oils
|
There are no translations available
ТУ У 23.2-30802090-120:2009
Масла трансмиссионные всесезонные Transmission предназначены для смазывания всех видов зубчатых передач: цилиндрических, конических, спирально-конических и гипоидных передач легковых и грузовых автомобилей, автобусов, тракторов, дорожной и строительной техники.
Масло Transmission марки Classic SAE 80W-90 API GL-4 предназначено для смазки механических коробок передач, легковых и грузовых автомобилей и мобильной техники, а также других узлов, где рекомендованы масла уровня API GL-4 (ТМ-4).
Масла марок Silver SAE 85W-90 API GL-5, Gold SAE 80W-90 API GL-5 и Platinum SAE 75W-90 API GL-5 предназначены для смазки механических трансмиссий с любыми типами зубчатых передач, включая гипоидные. Может применяться в ведущих мостах и раздаточных коробках легковых, грузовых автомобилей и другой мобильной техники, работающих в наиболее жестких условиях эксплуатации, где рекомендованы масла уровня API GL-5 (ТМ-5).
Гарантийный срок хранения – 5 лет со дня изготовления.
| Наименование показателя |
Classic
SAE 80W-90 API GL-4 |
Silver
SAE 85W-90 API GL-5 |
Gold
SAE 80W-90 API GL-5 |
Platinum
SAE 75W-90 API GL-5 |
Вязкость кинематическая
при 100°С, мм²/с, не менее |
16,5 |
17,5 |
17,5 |
13,5 |
|
Индекс вязкости, не менее |
95 |
95 |
95 |
95 |
|
Температура, °С: |
|
|
|
|
|
- вспышки в открытом тигле, не ниже |
200 |
210 |
200 |
185 |
|
- застывания, не выше |
−20 |
−15 |
−20 |
−25 |
|
Массовая доля, %: |
|
|
|
|
|
- механических примесей, не более |
0,01 |
Отсутствие |
Отсутствие |
0,01 |
|
- воды, не более |
Отсутствие |
Отсутствие |
Отсутствие |
Отсутствие |
|
- серы, не менее |
0,8 |
1,0 |
1,0 |
0,1 |
|
Цвет, единицы ЦНТ, не более |
5 |
5 |
5 |
5 |
|
Коррозионное воздействие на металлы |
Выдерживает |
| Трибологические характеристики на ЧШМ при температуре (20±5)°С: |
|
|
|
|
|
- нагрузка сваривания, Н, не менее |
3479 |
3687 |
3687 |
3283 |
|
- индекс задира, Н, не менее |
490 |
568 |
568 |
490 |
|
- диаметр пятна износа, мм, не более |
0,5 |
0,4 |
0,4 |
0,4 |
| Плотность при 20°С, кг/м³, не более |
910 |
910 |
910 |
900 | |
|
|
All-Union State Standards 23652-79 Transmission oil ТEp-15 is utilized for lubricating cylindrical, conic and helical conic gears. Guarantee period of storage – 5 years from the day of manufacture.
Index Name | ТEp-15 | Kinematic viscosity at 100°С, mm²/s | 15,0±1 | Dynamic viscosity at minus 15°С, Pа∙s, not more than | 200 | Temperature, °С: |
| - flash temperature in an open crucible, not lower than | 185 | - solidification temperature, not higher than | −18 | Fraction of total mass, %, not more than: |
| - water | Traces | - mechanical impurities | 0,03 | - water-soluble acids and alkalis | None | Sulphur fraction of total mass, %, not less than: | 3,0 | Ash level, %, not more than | 0,3 | Active elements’ fraction of total mass at the expense of additives, %, not less than: |
| - phosphorous | 0,06 | Corrosive influence on metals | Withstands | Compatibility with UIM-1 rubber (change of volume), % | 4-10 | Tribological characteristics at (20±5)°С: |
| - deterioration index at loading of 392 N, mm,
not more than | 0,55 | Density at 20°С, kg/m³, not more than | 950 |
|
|
|
ТУ У 23.2-30802090-073:2007
Hypoid Oil A is intended for greasing hypoid gear sets of cars of old models (GAZ-53, ZiL-130, Moskvich 401-412, GAZ M-20, GAZ -21, GAZ -24 etc.). Guarantee period of storage – 5 years from the day of manufacture. Index Name | Hypoid А | Appearance | Oily liquid of black colour | Kinematic viscosity at 100°С, mm²/s | 20,5–32,4 | Viscosity index | 50–110 | Temperature, °С: |
| - flash temperature in an open crucible, not lower than | 140 | - solidification temperature, not higher than | −20 | Fraction of total mass, %, not more than: |
| - water | traces | - mechanical impurities | 0,1 | - water-soluble acids and alkalis | none | Sulphur fraction of total mass, %, not less than: | 1,5 | Corrosive influence on metals: |
| - on steel plates | Withstands | - on copper plates | Withstands | Tribological characteristics at (20±5)°С: |
| - welding loading, N, not less than | 1744 | - scuff index, N, not less than | 340 | - deterioration index at loading of 196 N, mm, not more than | 0,6 | Density at 20°С, kg/m³, not more than | 944 |
|
|
|
All-Union State Standards 23652-79The transmission oils are used for lubricating transmission units of cars, tractors, diesel locomotives, agricultural, road and constructing machines, and toothed reducers. These oils contain antiscuff, depressor and antifoam additives. ТАp-15V — Transmission oil for reducers and gears. This oil is utilized for greasing transmission of lorries and spur, spiral canonical and worm gears, in which contact tension reaches 2000 mPа, and the temperature of the oil reaches 130°С. This oil is used all the year round in moderate climatic zone at the temperature to minus 25°С. ТАD-17i — The oil is used for greasing all types of gears (including hypoid ones) of cars and other mobile machines. The oil is efficient at the temperature not lower than minus 25°С. The top limit of long efficiency is 140°С. ТSp-10 — The oil is used for greasing heavily loaded cylindrical, conic and helical conic gears. ТSp-15К — The oil is used for greasing heavily loaded cylindrical, conic and helical conic gears of KaMAZ lorries. ТSp-14gip — The oil is used for hypoid gears of lorries.
Guarantee period of storage – 5 years from the day of manufacture. Index Name | ТАp-15V | ТАD-17i | ТSp-10 | ТSp-15К | ТSp-14gip | Kinematic viscosity, mm²/s: |
|
|
|
|
| - at 50°С | – | 110–120 | – | – | – | - at 100°С | 15,0±1,0 | Not less than 17,5 | Not less than 10,0 | 15,0±1,0 | Not less than
14,0 | Viscosity index, not less than | – | 100 | 90 | 90 | 85 | Temperature, °С: |
|
|
|
|
| - flash temperature in an open crucible, not lower than | 185 | 200 | 128 | 185 | 215 | - solidification temperature, not higher than | −20 | −25 | −40 | −25 | −25 | Fraction of total mass, %, not more than: |
|
|
|
|
| - mechanical impurities | 0,03 | None | 0,02 | 0,01 | 0,01 | - water-soluble acids and alkalis | None | – | None | – | – | - water | Traces | Traces | Traces | Traces | None | Corrosion test during 3 h: |
|
|
|
|
| - at 100°С on steel and copper plates | Withstands | – | Withstands | – | Withstands | - at 120°С on copper plates, points, not more than | – | 2s | – | 2s | – | Active elements’ fraction of total mass, %: |
|
|
|
|
| - phosphorous, not less than | – | 0,1 | – | – | – | - chlorine, not less than | – | – | – | – | 0,5 | - sulphur | – | 0,7–3,0 | – | – | – | Tribological characteristics on ChShM at (20±5)°С: |
|
|
|
|
| - welding loading, N,
not less than | 3283 | 3687 | 3479 | 3479 | 3920 | - scuff index, N,
not less than | 490 | 568 | 470 | 539 | 588 | - deterioration index at loading of 392 N, mm,
not more than | – | 0,40 | – | 0,5 | – | Density at 20°С, kg/m³, not more than | 930 | 907 | 915 | 910 | 910 |
|
|
|
ТУ У 23.2-30802090-049:2006
The oil is used for greasing necks of wheel pair pins of carriages and diesel locomotives with slide bearings.
Guarantee period of storage – 5 years from the day of manufacture. Index Name | Agrinol Axial Year-Round | Kinematic viscosity at 50°С, mm²/s, not less than | 28 | Dynamic viscosity at minus 20°С, mPa·s, not more than | 30000 | Temperature, °С: |
| - flash temperature in an open crucible, not lower than | 125 | - solidification temperature, not higher than | −35 | Fraction of total mass, %, not more than: |
| - mechanical impurities | 0,01 | - water | 0,3 | - water-soluble acids and alkalis | None | Corrosive influence on metals | Withstands | Density at 20°С, kg/m³, not more than | 990 |
|
|
| |
|
