|
ТУ У 23.2-30802090-026-2004 Transol-100А is a lubricant intended for greasing worm reducers and motor-reducers working with maximal unit loads in linkage not higher than 400 МPа. The lubricant is efficient during not less than 10 000 hours at the established temperature of the lubricant in a reducer not higher than110°С.Transol-200А is intended for greasing cylindrical and planetary reducers and motor-reducers working with maximal unit loads in linkage not higher than 2000 МPа. The lubricant is efficient during not less than 10 000 hours at the established temperature of lubricant in a reducer not higher than 70°С.Guarantee period of storage - 3 years from the day of manufacture.Table 88
| Index Name |
Transol-100А |
Transol-200А |
| Appearance |
Homogenous smooth ointment from light-brown to dark-brown colour |
| Temperature of drop falling, °С, not lower than |
150 |
150 |
| Penetration at 25°С, mm•10−1 |
400–430 |
385–430 |
| Efficient viscosity at minus 30°С and at the average gradient of the strain rate of 10 s−1, Pа•s, not more than |
1200 |
1400 |
| Colloid stability, % of the secreted oil |
10–35 |
10–30 |
| Fraction of total mass, not more than: |
|
|
| - mechanical impurities % |
0,05 |
0,05 |
| - water, % |
Traces |
Traces |
| - free alkali re-calculated into NaOH, % |
None |
0,1 |
| - free organic acids, mg КОN/g |
2,0 |
2,0 |
| Corrosive influence on metals |
Withstands |
| Evaporation at 100°С, %, not more than |
1,5 |
0,8 |
| Sulphur content, %, not less than |
0,7 |
0,8 |
| Tribological characteristics on ChShM at (20±5)°С: |
|
|
| - welding loading, N, not less than |
1744 |
2764 |
| - critical loading, N, not less than |
696 |
696 |
| - scuff index, N, not less than |
343 |
392 |
- deterioration index at loading of 196 N, mm,
not more than |
0,6 |
0,55 |
|
