Agrinol LitolТУ У 23.2-30802090-018-2004Agrinol Litol and Agrinol Litol-z -are plastic lithium lubricants that are used in industrial and agricultural equipment. These two types represent anti-friction waterproof multipurpose lubricants.Lubricants are intended for greasing rolling bearings and sliding for all types of gears: joints and other gears of the industrial and electrical machinery, conveyors and various mechanisms of industrial equipment, agricultural and construction equipment.Agrinol Litol is used to lubricate embedded mechanisms that operate at high loads and speeds, high temperatures and with the possibility of moisture ingress at the sites of friction. Agrinol Litol-z is used to lubricate the friction mechanisms, machines and other industrial equipment with a centralized means of lubrication as well as the method of loading.Lubricants are efficient to work in the temperature range from:Agrinol Litol from minus 30°С up to 130°С; Agrinol-Litol z from minus 40°С up to 120°С;In a short-term period up to 150°С.
Guarantee period of storage – 5 years from the day of manufacture.
| Index name |
Litol-24 |
Agrinol Litol |
Agrinol-Litol-z |
| Appearance |
Homogeneous ointment from light-yellow to brown colour |
| Temperature of drop falling, °С, not lower than |
185 |
185 |
180 |
| Penetration at 25°С, mm·10−1 |
220–250 |
230–290 |
270–340 |
| Efficient viscosity Pа·s, |
|
|
|
| - at minus 20°С and at the average gradient of the strain rate of 10 s−1, |
650 |
1000 |
800 |
| - at 0°С and at the average gradient of the strain rate of 10 s−1, |
280 |
300 |
250 |
| - at 50°С and at the average gradient of the strain rate of 10 s−1, |
8 |
8 |
4 |
| Mechanical stability:: |
|
|
|
| - at 20°С |
500–1000 |
350 |
250 |
| - at 50°С |
– |
150 |
100 |
| - at 80°С |
200 |
– |
– |
| Colloid stability, %, not more than |
12 |
12 |
20 |
| Corrosive influence on metals |
Withstands |
| Evaporation at 120°С within 1 hour., %, not more than |
6 |
6 |
10 |
| Fraction of total mass, not more than: |
|
|
|
| - mechanical impurities, % |
0,05 |
0,05 |
0,05 |
| - water, % |
none |
Nonе |
None |
| - free alkali re-calculated into NaOH, % |
0,1 |
0,2 |
0,2 |
| - free organic acids, mg KON/g |
– |
1,0 |
1,0 |
| Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
|
|
| - welding loading, N, not more than |
1410 |
1381 |
1381 |
| - critical loading, N, not less than |
630 |
617 |
617 |
| - scuff index, N, not less then |
274 |
275 |
275 |
| - deterioration index at loading of 196 N, mm, not more than |
– |
0,6 |
0,6 |
| Swelling of the 26-44 rubber, % |
|
|
|
| - changing of volume |
±8 |
±8 |
±8 |
| - changing of hardness |
±8 |
±8 |
±8 |
|
