Waterproof SKS HV, SCS 300 m Print
SKS HV  TS U 23.2-30802090-077:2009
Multi-purpose waterproof SKS HV lubricants are recommended for greasing industrial equipment bearings of metallurgical enterprises, working in conditions of high loads, high temperatures and contact with water.
Lubricants of brands SKS HV1 and SKS HV1* can be used in centralized lubrication systems and devices of forced lubricants delivery into friction units. Lubricants of brands SKS HV2 and SKS HV2* are recommended for mortgages means of greasing bearings.
Index name SKS HV1 SKS HV1* SKS HV2 SKS HV2*
Meets classifications NLGI
DIN 51502		 1 / 2
KP1 / 2R-25		 1 / 2
KP1 / 2R-25		 2
KP2R-20		 2
KP2R-20
Thickener Ca Sulphonate
Operating temperature, min…max, °С – 25 … + 180 – 20 … + 190
Dropping point, °С, not lower than 300
Penetration at 25 °С, мм·10 – 1 280 – 320 250 – 280
Proof strength at, 50 °С, Pa, not less than 120 150
Colloid stability, %, not more than 5 7
Evaporation at 120 °С, %, not more than 3 2
Water resistance, class 1а 1в
Efficient viscosity at the average gradient of the strain rate of 10 s–1, Pа·s, not more than 900 (–10 °С) 1100 (–10 °С)
Tribological characteristics on Four-ball machine at (20 ± 5) °С, N, not less than:
welding loading, N, not less than
critical loading, not less than
scuff index, N, not less than
deterioration index (196N), mm, not more than
3920
980
440
0,40

 

SCS 300 m         TS U 23.2-30802090-132:2009
SCS- 300 m are multi-purpose, heat-resistant, waterproof sulfonate-calcium lubricants that are recommended for greasing bearings of industrial equipment, metallurgical enterprises, working in conditions of high loads, high temperatures and water contact.
Lubricants of brands SCS 300 m-1 and SCS-1 300 m* can be used in centralized greasing systems and devices with forced delivery of lubricants in friction units. Lubricants of brands SCS 300 m-2 and SCS 300 m-2* are recommended for lubrication of embedded bearings. The brands of lubricants, marked with asterisks differ from analogues only in colour (red).
Index name SCS 300 m-1 SCS 300 m-1* SKS 300 m-2 SKS 300 m-2*
Meets classifications NLGI,
DIN 51502		 1 / 2
KP1 / 2R-25		 2
KP2R-20
Thickener Sulfonate Са
Operating temperature, min…max, °С – 25 … + 180 – 20 … + 190
Dropping point, °С, not lower than 300
Penetration at 25 °С, mm·10 – 1 280 – 320 250 – 280
Proof strength at 50 °С, Pa, not less than 120 200
Colloid stability, %, not more than 4 3
Evaporation at 120 °С, %, not more than 2 1,5
Water-resistance, class, not lower than 1а 1в
Efficient viscosity, Pа·s at the average gradient of the strain rate of 10 s–1, not more than 800 (–10 °С) 1100 (–10 °С)
Tribological characteristics on Four-ball machine at (20 ± 5) °С, N, not less than:
welding loading, N, not less than
critical loading, not less than
deterioration index (196N), mm, not more than
4136
1230
0,5