Graphite grease, Fatty solidol Print
Fatty Solidol      All-Union State Standard 1033-79
The water-proof hydrated calcium lubricant Fatty Solidol is intended for greasing of rolling and sliding friction units of various machines and mechanisms. It functions at the temperature range from minus 30 °С up to 65 °С. The lubricant is used efficiently in such rather powerful mechanisms as bearings, joints, blocks etc. at the temperature to minus 50 °С.
The lubricant is used for filling in disassembled friction units working at the temperature from minus 50 °С up to 65 °С as well as for filling in friction units assisted by manual grease pumps at a temperature down to minus 20 °C.
Graphite Grease          All-Union State Standard 3333-80
Graphite Grease is intended for greasing of hard, heavily loaded mechanisms including open gear-boxes, screw joints, guide screws, jacks, springs etc.
The lubricant is efficient at the temperature lower than minus 20 °С in springs and other analogous mechanisms.
Index name Graphite grease Fatty solidol
Meets classifications NLGI
DIN 51502		 2
OGF 2 G-20		 2 / 3
K 2 / 3 C-25
Thickener Са
Operating temperature, min…max, °С – 20 (– 30) … + 60 – 30 (– 50) … + 65
Dropping Point, °С, not lower than 77 78
Penetration at 25 °С, мм·10 – 1 >250 230 – 290
Proof strength at 50 °С, Pа, not less than 1001 196
Efficient viscosity at 0 °С and at the average gradient of the strain rate of 10 s–1, Pа·s, not more than 1001 250
Colloid stability, % of the separated oil, not more than 5 –

1              The index is determined by the manufacturer prior to the introduction of the filler