All-Union State Standard 1957-73Universal thermally lubricant Konstalin-1 and Konstalin-2 are used for lubrication of fan units of casting machines, blast furnaces and cement kilns, roller bearings on the rail. The lubricant is efficient at the temperature varying from minus 20°С up to 110°СGuarantee period of storage – 5 years from the day of manufacture.
| Index name |
Konstalin-1 |
Konstalin-2 |
| Appearance |
Homogenous ointment without balls from light-yellow to light-brown colour |
| Temperature of drop falling, °С,not lower than |
130 |
150 |
| Penetration at 25°С, mm•10−1 |
225–275 |
175–225 |
| Fraction of total mass, not more than: |
|
| - Mechanical impurities, % |
None |
| - water, % |
0,5 |
| - free alkali re-calculated into NaOH, %, not more than |
0,2 |
| - free organic acids, mg КОN/g, not more than |
None |
| Ash, %, not more than |
4,0 |
4,5 |
| Corrosive influence on metals |
Withstands |
| Stability test |
Withstands |
|
