HP

Produced by: TS U 23.2-30802090-022:2003
Agrinol HP technological lubricants are intended for use in form of (2 5)%-aqueous emulsions (with hardness up to 5 mg-eq/dm3 ) at the stage of cold rolling steel, and in form of (5-10)%-aqueous emulsions (with hardness up to 17 mg-eq/dm3 ) - for oiling of the steel stripes before wrapping them in a roll with following thermal treatment.
Characteristics:
Index name | HP |
---|---|
Working emulsion | 3 % working emulsion |
Kinematic viscosity at 50°С, mm2/s | 35 |
Alkaline number, mg КОН/g, not less than | - |
Acid number, mg КОН/g, within, within | not more than 12 |
Corrosive effect on metals | Pass |
Mass fraction of water, %, not more than | 1 |
Storage stability | Pass |
рН value, рН units, within | 8-9 |
Stability within 6 hours, %, not more than | Pass |
Application area:
Agrinol HP technological lubricants are intended for use in form of (2 5)%-aqueous emulsions (with hardness up to 5 mg-eq/dm3 ) at the stage of cold rolling steel, and in form of (5-10)%-aqueous emulsions (with hardness up to 17 mg-eq/dm3 ) - for oiling of the steel stripes before wrapping them in a roll with following thermal treatment.This product can be used in the processing of ferrous metals by pressure or cutting.
Quality index name are only informational and may be different from GOST.