EHP

EHP

Produced by: TS U 23.2-30802090-025:2004

Agrinol EHP  technological lubricants are intended for use in form of (2 5)%-aqueous emulsions (with hardness up to 5 mg-eq/dm3 ) at the stage of cold rolling steel, and in form of (5-10)%-aqueous emulsions (with hardness up to 17 mg-eq/dm3 ) - for oiling of the steel stripes before wrapping them in a roll with following thermal treatment.

Characteristics:

Index nameEHP
Working emulsion 3 % working emulsion
Kinematic viscosity at 50°С, mm2/s 50
Alkaline number, mg КОН/g, not less than -
Acid number, mg КОН/g, within, within not more than 16
Corrosive effect on metals Pass
Mass fraction of water, %, not more than 1
Storage stability Pass
рН value, рН units, within 8-9
Stability within 6 hours, %, not more than Pass

Application area:

Agrinol EHP  technological lubricants are intended for use in form of (2 5)%-aqueous emulsions (with hardness up to 5 mg-eq/dm3 ) at the stage of cold rolling steel, and in form of (5-10)%-aqueous emulsions (with hardness up to 17 mg-eq/dm3 ) - for oiling of the steel stripes before wrapping them in a roll with following thermal treatment.

This product can be used in the processing of ferrous metals by pressure or cutting.

Quality index name are only informational and may be different from GOST.