Tosol-40

Tosol-40

Produced by: TS U 24.6-30802090-130:2009

Agrinol Tosol cooling liquids are designed for cooling of an internal combustion engines, as well as the working fluid in the other heat exchangers operating at low and moderate temperatures.
Agrinol Tosol can be used both in copper and in aluminum radiators. It should be poured directly into the cooling system. Fluid is designed for operation without replacement and without addition of any additives during 60,000 km or for 2 year period.

Agrinol Tosol-40 — regions, where environmental temperature is not lower than minus 40°С.

Characteristics:

Index nameTosol-40
Crystallization temperature, °С, not more than -40
РН level, рН units, within 7,5-11,0
Corrosive effect on metals, g /m2 *24 hours, not more than:
- Copper, cast iron, brass, steel 0,2
- Solder 0,3
- Aluminum 0,5
Rubber swelling, %, not more than 5
Alkalinity, cm3 , not less than 10
Density at 20°С, kg/m3, within 1065-1135

Application area:


Agrinol Tosol cooling liquids are designed for cooling of an internal combustion engines, as well as the working fluid in the other heat exchangers operating at low and moderate temperatures. 
Agrinol Tosol can be used both in copper and in aluminum radiators. It should be poured directly into the cooling system. Fluid is designed for operation without replacement and without addition of any additives during 60,000 km or for 2 year period.

Agrinol Tosol-40 — regions, where environmental temperature is not lower than minus 40°С.

Quality index name are only informational and may be different from GOST.